|
HS Code |
523715 |
| Material Type | E-Glass |
| Fiber Length | 3–50 mm |
| Fiber Diameter | 10–13 microns |
| Moisture Content | <0.2% |
| Density | 2.6 g/cm³ |
| Tensile Strength | 1700 MPa |
| Modulus Of Elasticity | 72 GPa |
| Thermal Conductivity | 1.0 W/mK |
| Glass Transition Temperature | 850°C |
| Color | White |
| Compatibility | Thermoset and thermoplastic resins |
| Surface Treatment | Silane or other sizing agents |
| Bulk Density | 0.3–1.0 g/cm³ |
| Ash Content | ≥ 98% |
As an accredited E-Glass Chopped Strands factory, we enforce strict quality protocols—every batch undergoes rigorous testing to ensure consistent efficacy and safety standards.
|
Fiber length: E-Glass Chopped Strands with 4.5 mm fiber length are used in thermoplastic reinforcement, where they improve tensile strength and dimensional stability. Moisture content: E-Glass Chopped Strands with less than 0.10% moisture content are used in electrical molding compounds, where they ensure consistent dielectric properties. Filament diameter: E-Glass Chopped Strands with 13 micron filament diameter are used in automotive underbody panels, where they enhance impact resistance and mechanical durability. Sizing compatibility: E-Glass Chopped Strands with PA-compatible sizing are used in polyamide composite production, where they optimize interfacial adhesion for higher flexural modulus. Bulk density: E-Glass Chopped Strands with a bulk density of 1.2 g/cm³ are used in injection molding, where they facilitate uniform material flow and reduce processing defects. Loss on ignition: E-Glass Chopped Strands with a loss on ignition of 0.8% are used in unsaturated polyester resins, where they minimize void formation and improve laminate quality. Stability temperature: E-Glass Chopped Strands with 800°C stability temperature are used in high-temperature insulation boards, where they maintain structural integrity under thermal stress. Chop length: E-Glass Chopped Strands with a 3 mm chop length are used in sheet molding compounds, where they provide optimal dispersion and surface smoothness. Surface treatment: E-Glass Chopped Strands treated with silane coupling agents are used in polypropylene composites, where they enhance chemical resistance and wet-out. Purity: E-Glass Chopped Strands with 99.7% purity are used in electronic device housings, where they ensure minimal ionic contamination for reliable performance. |
| Packing | E-Glass Chopped Strands are packaged in 25 kg moisture-resistant polyethylene bags, securely sealed to prevent contamination and ensure product integrity. |
| Container Loading (20′ FCL) | Container loading for E-Glass Chopped Strands (20′ FCL): typically 20 metric tons, packed in pallets or bags, optimizing space and safety. |
| Shipping | E-Glass Chopped Strands are securely packed in moisture-resistant, multi-layered bags or containers to prevent contamination. Shipments are typically palletized and shrink-wrapped for stability during transport. Each package is clearly labeled with product details and safety instructions, ensuring safe and efficient delivery for industrial or commercial use. |
| Storage | E-Glass Chopped Strands should be stored indoors in a dry, well-ventilated area, away from direct sunlight and moisture. Keep packaging intact until use to prevent contamination and fiber damage. Avoid stacking heavy loads on top to prevent deformation. Ideal storage temperature is between 15–35°C, with relative humidity below 75%. Handle carefully to maintain product integrity. |
| Shelf Life | E-Glass Chopped Strands have an indefinite shelf life if stored in original packaging, dry conditions, and away from direct sunlight. |
Competitive E-Glass Chopped Strands prices that fit your budget—flexible terms and customized quotes for every order.
For samples, pricing, or more information, please contact us at +8615365186327 or mail to sales3@ascent-chem.com.
We will respond to you as soon as possible.
Tel: +8615365186327
Email: sales3@ascent-chem.com
Flexible payment, competitive price, premium service - Inquire now!
